Air Cleaner Fresh Air Duct/Hose: Service and Repair

Air Cleaner Inlet Duct Replacement

Removal Procedure





1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (Service and Repair).
2. Loosen the intake air duct clamps.
3. Disconnect the positive crankcase ventilation (PCV) tube from the air intake duct.
4. Remove the air intake duct from the throttle body and the mass air flow (MAF) sensor.
5. Remove the air intake duct.



Installation Procedure





1. Install the air intake duct to the MAF sensor.
2. Install the air cleaner intake duct to the throttle body.
3. Connect the PCV tube to the air intake duct.

Notice: Refer to Fastener Notice (Fastener Notice).

4. Tighten the air intake air duct clamps.

Tighten the clamps to 2 N.m (18 lb in).

5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (Service and Repair).