Rear Door Window Motor: Service and Repair

Rear Side Door Window Regulator Motor Replacement

Removal Procedure




1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Service and Repair).
2. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).

Notice: Refer to Paint Damage Notice.

3. Remove the window regulator. Refer to Rear Side Door Window Regulator Replacement (Service and Repair).
4. Remove the window regulator and motor through the access opening in the door panel.
5. Remove the window regulator motor bolts from the window regulator.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the window regulator motor bolts to the window regulator.

Tighten the bolts to 6 N.m (53 lb in).

2. Install the window regulator and motor through the access opening.
3. Install the window regulator. Refer to Rear Side Door Window Regulator Replacement (Service and Repair).
4. Remove the masking tape.
5. Inspect the window for proper operation and programming. Refer to Window Regulator Motor Programming and Setup (Programming and Relearning).
6. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
7. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Service and Repair).