Coolant Heater Cord Replacement (L26/3.8L)

Coolant Heater Cord Replacement (L26/3.8L)

Removal Procedure




1. Remove the coolant heater cord (1) from in between the underhood electrical center and upper tie bar.
2. Cut the coolant heater cord straps (2) attaching the cord to the starter cable.




3. Disconnect the coolant heater cord from the coolant heater.
4. Remove the coolant heater cord.

Installation Procedure





Notice: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine compartment securing with tie straps as necessary to prevent damage.

1. Install the coolant heater cord.
2. Connect the coolant heater cord to the coolant heater.




3. Install NEW straps (2) securing the coolant heater cord to the starter cable.
4. Install the coolant heater cord (1) in between the underhood electrical center and upper tie bar.