4T80-E - Automatic Transmission

Torque Converter Cover Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the attaching bolts and the engine-to-transmission brace.
3. Remove the torque converter cover.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the torque converter cover.

Tighten the cover bolt to 12 Nm (106 lb in).

2. Install the engine-to-transmission brace and attaching bolts.

Tighten the bolts to 47 Nm (35 lb ft).

3. Lower the vehicle.