Exhaust Manifold Heat Shield Replacement - Left Side

Exhaust Manifold Heat Shield Replacement - Left Side (LLT)

Removal Procedure




Warning: Refer to Hot Exhaust System Warning (Hot Exhaust System Warning)

1. Disconnect the bank 2 sensor 1 heated oxygen sensor (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (LF1) (Heated Oxygen Sensor Replacement - Bank 2 Sensor 1)Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (LLT) (Heated Oxygen Sensor Replacement - Bank 2 Sensor 1).
2. Remove the exhaust manifold heat shield bolts.
3. Remove the exhaust manifold heat shield.

Installation Procedure




1. Install the exhaust manifold heat shield.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the exhaust manifold heat shield bolts and tighten to 10 Nm (89 lb in).
3. Connect the bank 2 sensor 1 HO2S.