Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure




1. Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Instrument Panel Insulator Panel Replacement - Left Side).
2. Disconnect the electrical connector from the park brake warning lamp switch.
3. Remove the park brake warning lamp switch retaining bolt.
4. Remove the park brake warning lamp switch.

Installation Procedure




1. Install the park brake warning lamp switch to the park brake lever assembly. Align the pin to the locator hole.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the park brake warning lamp switch retaining bolt.

Tighten the bolt to 2.0 Nm (18 lb in).

3. Connect the park brake warning lamp switch electrical connector.
4. Install the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Instrument Panel Insulator Panel Replacement - Left Side).