Manual Transmission Shift Lever Cable Replacement

Manual Transmission Shift Lever Cable Replacement

Removal Procedure

1. Remove the battery tray. Refer to Battery Tray Replacement Service and Repair.





2. Remove shift lever and selector lever cable (2) from transmission control housing (3).

3. Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.





4. Remove shift lever and selector lever cable (3) from bulkhead.

5. Remove the front floor console. Refer to Front Floor Console Replacement Front Floor Console Replacement.





6. Unlock shift lever and selector lever cable adjust locks (2).

7. Clip shift lever and selector lever cable (3) out of transmission control lever housing (1).

Installation Procedure





Note:
Do not lock yet.

1. Slide shift lever and selector lever cable into shift lever and selector lever cable adjust locks (2).

2. Clip shift lever and selector lever cable (3) into transmission control lever housing (1).

3. Install shift lever and selector lever cable from inside the vehicle.





Note:
Install the guide with the white marking upwards to the bulkhead. Do not cross the cables.

4. Install shift lever and selector lever cable (3) to bulkhead.

5. Check for correct fit.





6. Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).

7. Install shift lever and selector lever cable to transmission control housing (3).

8. Install the battery tray. Refer to Battery Tray Replacement Service and Repair.

9. Adjust shift lever and selector lever cable. Refer to Manual Transmission Shift Lever Cable Adjustment Manual Transmission Shift Lever Cable Adjustment.

10. Install the front floor console. Refer to Front Floor Console Replacement Front Floor Console Replacement.