Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement

Removal Procedure

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement Air Cleaner Outlet Duct Replacement.

2. Unclip the ECM wiring harness from the oil level indicator tube bracket.




3. Remove the oil level indicator tube bracket bolt (2).

4. Remove the oil level indicator tube (1) from the oil pan.

5. Remove and DISCARD the oil level indicator tube seal ring (3).

Installation Procedure




1. Install the oil level indicator tube (1) to the oil pan along with a NEW seal ring (3).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the oil level indicator tube bracket bolt (2) and tighten to 10 Nm (89 lb in).

3. Clip the ECM wiring harness to the oil level indicator tube bracket.

4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement Air Cleaner Outlet Duct Replacement.