Transmission Rear Mount Replacement (RWD)

Transmission Rear Mount Replacement (RWD)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the exhaust system. Refer to Exhaust System Replacement (Service and Repair) .
3. Support the transmission with a suitable jack and a block of wood.
4. Remove the transmission support to body mounting bolts.




5. Remove the transmission to support mounting bolts.
6. Remove the transmission mount from the vehicle.



Installation Procedure

1. Install the transmission mount to the vehicle.





Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the transmission to support mounting bolts.

Tighten the bolts to 60 N.m (44 lb ft).

3. Install the transmission mount to body mounting bolts.

Tighten the bolts to 60 N.m (44 lb ft).

4. Remove the transmission support.
5. Install the exhaust system.
6. Lower the vehicle.