DTC 67

Wiring Diagram:

CIRCUIT DESCRIPTION
The electronic brake control module receives Brake Light Switch status from the PCM via serial data. If fault Code 67 sets, it may be indicative of a loss of switch input to the PCM, check for PCM fault Code PO90 (STOP/BITSI/CRUISE BRAKE SWITCH FAULT CODE) or P106 (BRAKE LIGHT SWITCH FAULT CODE) and refer to Computers and Control Systems. Computers and Control Systems

TEST CONDITION(S)
1. Tested continuously.

FAILURE CONDITION(S)
1. EBTCM receives failure status of Brake Light Switch from PCM.

ACTION TAKEN
1. Code set.
2. "TRACTION DISABLED" message ON.