Suspension Control - Computer Command Ride (CCR/SSS)

CODE 32 LATERAL ACCELERATION SWITCH ERROR









TEST CONDITIONS:
The Control Module will monitor the lateral accelerator switch signal for invalid voltage levels.

FAULT CONDITIONS:
If lateral accelerator switch voltage is too high or too low, set code.

ACTION TAKEN:
Record lateral accelerator switch error,
Turn on "SERVICE CCR"/"SERVICE SSS" telltale lamp,
Disable lateral accelerator switch input until valid voltage level is detected.

DESCRIPTION:
A lateral accelerator switch error occurs when the lateral accelerator switch signal is short-circuited to B+ or ground, or the lateral accelerator switch is open-circuited or disconnected. Recovery occurs upon detection of valid lateral accelerator switch input voltage.