Suspension Control

CIRCUIT DESCRIPTION
The Automatic Level Control (ALC) sensor monitors the trim height of the rear of the vehicle. The ALC sensor compares the trim height of the vehicle with the desired trim height programmed in the ALC sensor memory. The ALC sensor energizes the exhaust solenoid valve to exhaust the air in the system when the vehicle is higher than the desired trim height.
Excessive exhaust solenoid valve activity is generally due to the presence of pneumatic line blockages or unloaded vehicle conditions.

CONDITIONS FOR SETTING THE DTC
If the exhaust valve is active for more than 5 minutes and the rear of the vehicle remains above a trim position.

ACTION TAKEN WHEN THE DTC SETS
^ All compressor exhaust activity is disabled.
^ The LEVELING indicator lamp flashes.

CONDITIONS FOR CLEARING THE DTC
^ A current Diagnostic Trouble Code (DTC) becomes history when conditions for the fault are no longer present and the ignition cycles from OFF to ON.
^ A history DTC will clear after 20 ignition cycles.
^ Use a scan tool in order to clear this DTC.

DIAGNOSTIC AIDS
Inspect for misrouted tubing, or evidence of being pinched.

TEST DESCRIPTION
The number(s) below refer to the step number(s) on the diagnostic table.
2. This step inspects the ALC sensor actuating arm and link rod for damage.
3. This step tests the operation of the exhaust solenoid valve.
4. This step checks the exhaust operation of the ALC system.