Rear Compartment Lid Latch Replacement (w/o Interior Release Handle

Rear Compartment Lid Latch Replacement (w/o Interior Release Handle)

Removal Procedure

1. Open the rear compartment lid.
2. Remove the rear compartment lid trim panel. Refer to Rear Compartment Lid Inner Panel Trim Replacement (Service and Repair) .




3. Disconnect the electrical connector (1) from the rear compartment lid latch.




4. Remove the latch release cable (1) from the rear compartment lid lock cylinder, by releasing the tab (2) with a flat bladed tool.




5. Remove the fasteners (1) securing the rear compartment lid latch (2) to the rear compartment lid (5).
6. Remove the rear compartment lid latch (2) from the rear compartment lid (5).



Installation Procedure





1. Install the rear compartment lid latch (2) to the rear compartment lid (5).

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (1) in order to secure the rear compartment lid latch (2) to the rear compartment lid (5).

Tighten the fasteners (1) to 25 N.m (18 lb ft).

3. Install the latch release cable (3) to the rear compartment lid lock cylinder (4).




4. Connect the electrical connector (1) to the rear compartment lid latch (2).
5. Install the rear compartment lid trim panel. Refer to Rear Compartment Lid Inner Panel Trim Replacement (Service and Repair) .
6. Close the rear compartment lid.