B1396

Circuit Description
The steering column module provides a 5 volt reference voltage to the tilt position sensor circuit and the telescope position sensor circuit. The steering column module has a designated circuit that monitors the 5 volt reference voltage.

Conditions for Running the DTC
The steering column module is ON.

Conditions for Setting the DTC
The DTC will set as current when the voltage is out of the range of 4.6 volts to 5.2 volts for 1.2 seconds.

Action Taken When the DTC Sets
Memory recall functions for the steering column module will be disabled.

Conditions for Clearing the DTC
- The DTC will clear from the current status when the voltage is within the range of 4.6 volts to 5.2 volts for 1.2 seconds
- Use a scan tool.