Navigation Module: Service and Repair
NAVIGATION DISPLAY MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the instrument panel center trim plate. Refer to Trim Panel Replacement - IP Center in Instrument Panel, Gauges and Warning Indicators.
2. Remove the center console trim plate.
3. Remove the HVAC control/navigation display bracket fasteners.
4. Disconnect the electrical connectors from the navigation display and the HVAC control assembly.
5. Remove the navigation display retaining fasteners.
6. Remove the navigation display from the navigation / HVAC control mounting bracket.
INSTALLATION PROCEDURE
1. Mount the navigation display to the navigation / HVAC control mounting bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the navigation display retaining nuts.
Tighten
Torque the radio retaining nuts to 10 N.m (88 lb in).
3. Connect the electrical connectors to the navigation display and the HVAC control.
4. Install the navigation display / HVAC control assembly.
Tighten
Torque the assembly fasteners to 10 N.m (88 lb in)
5. Install the center console trim plate.
6. Install the instrument panel center trim plate. Refer to Trim Panel Replacement - IP Center in Instrument Panel, Gauges and Warning Indicators.