Hood Latch Release Cable: Service and Repair

Hood Latch Release Cable Replacement

Removal Procedure

1. Remove the radiator support sight shield. Refer to Radiator Support Sight Shield Replacement (Radiator Support Sight Shield Replacement) .
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
3. Remove the engine compartment fuse and relay center cover.





Important: Tie a string around the cable before you remove the cable from the vehicle in order to ensure proper routing and ease installation.


4. Remove the release cable from the primary latch.
5. Remove the clips from the cable.
6. Route the cable along the body rail toward the rear of the vehicle.
7. Remove the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (Service and Repair) in Instrument Panel Gages and Console.




8. Remove the hood release latch fasteners.
9. Push the cable and the grommet into the passenger compartment.
10. Release the string from the old cable assembly.
11. Remove the release cable and release latch (2) from the vehicle.



Installation Procedure





1. Tie the string to the new cable assembly.
2. Install the cable assembly to the cowl.
3. Carefully pull the new cable into position.
4. Route the cable along the body rail to the front of the vehicle.
5. Install the grommet to the cowl panel.
Turn the grommet to the right in order to ease installation.
6. Install the release cable to the primary latch.




7. Position the release cable latch (2) to the lower instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

8. Install the fasteners to the latch release handle (2).

Tighten the fasteners to 6 N.m (53 lb in).

9. Install the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (Service and Repair) in Instrument Panel Gages and Console.
10. Install the engine compartment fuse and relay center cover.
11. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
12. Install the radiator support sight shield. Refer to Radiator Support Sight Shield Replacement (Radiator Support Sight Shield Replacement) .