Seat Back Frame Replacement - Front
Seat Back Frame Replacement - Front
Removal Procedure
Caution: Refer toSIR Caution in Cautions and Notices.
1. Remove the front bucket seat. Refer toSeat Replacement - Bucket (Seat Replacement - Bucket) .
2. Remove the seat cushion from seat. Refer toSeat Cushion Replacement - Front (Seat Cushion Replacement - Front) .
3. Remove the push-in retainer (1) from the trim covers.
4. Remove the trim covers.
5. Remove the seat back cover and pad. Refer toSeat Back Cover and Pad Replacement - Front (Seat Back Cover and Pad Replacement - Front) .
6. Remove the front seat belt assembly. Refer toSeat Belt Replacement - Front .
Important: Note the electrical wiring routing during disassembly in order to ensure proper electrical wiring routing during reassembly.
7. Disconnect and remove the remaining electrical connectors are attached to the seat back frame.
8. Remove the bolt retaining the seat back frame to the riser.
9. Remove the bolts (1) retaining the seat back frame to the recliner.
10. Lift up on the seat back frame in order to disengage the seat back from the recliner.
Installation Procedure
1. Slide the seat back frame down into the recliner and align the fasteners holes.
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the seat back to recliner bolts (1).
Tighten the bolts to 52 Nm (38 lb ft).
3. Install the seat back to riser bolt (1).
Tighten the bolt to 35 Nm (26 lb ft).
4. Install the front seat belt assembly. Refer toSeat Belt Replacement - Front .
5. Install the seat back cover and pad. Refer toSeat Back Cover and Pad Replacement - Front (Seat Back Cover and Pad Replacement - Front) .
6. Install the trim covers.
7. Install the push-in retainer (1) to secure the trim cover.
8. Install the front seat cushion. Refer toSeat Cushion Replacement - Front (Seat Cushion Replacement - Front) .
9. Route and connect the electrical connectors to the seat back.
10. Install the front seat. Refer toSeat Replacement - Bucket (Seat Replacement - Bucket) .