Sail Panel Replacement (With RPO Code WC2, WC8)

Sail Panel Replacement (WC2, WC8)

Removal Procedure





1. Remove the rear door weatherstrip. Refer to Weatherstrip Replacement - Rear Door Opening (Weatherstrip Replacement - Rear Door Opening) in Doors.
2. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Standard) (Seat Back Replacement - Rear (Standard))Seat Back Replacement - Rear (WC2, WC8) (Seat Back Replacement - Rear (WC2, WC8)) in Seats.
3. Pull the edge of the trim (1) away from the armor plating (2).
4. Rotate the trim towards the rear seat in order to release the retaining edge of the trim.



Installation Procedure





1. Install the trim to the vehicle.
2. Rotate the trim (1) towards the front seat until the trim snaps into the armor plating (2).
3. Install the rear seat back. Refer to Seat Back Replacement - Rear (Standard) (Seat Back Replacement - Rear (Standard))Seat Back Replacement - Rear (WC2, WC8) (Seat Back Replacement - Rear (WC2, WC8)) in Seats.
4. Install the rear door weatherstrip. Refer to Weatherstrip Replacement - Rear Door Opening (Weatherstrip Replacement - Rear Door Opening) in Doors.