Trim Panel Replacement - Rear Window Shelf (Without Sunshade)

Trim Panel Replacement - Rear Window Shelf (Without Sunshade)

Removal Procedure





1. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Standard) (Seat Back Replacement - Rear (Standard))Seat Back Replacement - Rear (WC2, WC8) (Seat Back Replacement - Rear (WC2, WC8)) in Seats.
2. Remove the rear seat belt retractors. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
3. Remove the 2 push in retainers from the cross car beam.
4. Lift up on the front edge of the rear shelf panel in order to release the hook and loop material.
5. Lift up on the rear of the rear shelf panel in order to release the hook and loop material.
6. Remove the rear shelf panel.



Installation Procedure





1. Install the rear shelf into the vehicle.
2. Push the panel rearward while applying downward pressure until it contacts the rear window.
3. Route the center seat belt through the slot in the trim panel.
4. Push down on the rear shelf panel tightly to seat the hook and loop material.
5. Seat the front of the rear shelf panel to the cross car beam.
6. Install the 2 push in retainers.
7. Install the rear seat belt retractors. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
8. Install the rear seat back. Refer to Seat Back Replacement - Rear (Standard) (Seat Back Replacement - Rear (Standard))Seat Back Replacement - Rear (WC2, WC8) (Seat Back Replacement - Rear (WC2, WC8)) in Seats.