Removal and Replacement

Driver Information Center Switch Replacement

Removal Procedure





Caution: Refer to SIR Caution.
1. Remove the instrument cluster trim panel (3). Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Instrument Panel Cluster (IPC) - Trim Panel Replacement).
2. Disconnect the left and the right driver information center switch electrical connectors (1,2).
3. Remove the fasteners from the switch being serviced.



Installation Procedure





1. Align the switch that was removed with the instrument cluster trim panel (3) and install the fasteners.
2. Connect the two electrical connectors to the driver information center switches (1,2).
3. Install the instrument cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Instrument Panel Cluster (IPC) - Trim Panel Replacement).