Ash Tray: Service and Repair

Ashtray Replacement

Removal Procedure

1. Remove the center instrument panel trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Removal and Replacement) .




2. Remove the 4 screws (1) securing the ashtray.
3. Disconnect the electrical connectors.



Installation Procedure





1. Connect the electrical connectors.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 4 screws (1) securing the ashtray.

Tighten the screws (1) to 9 N.m (80 lb in).

3. Install the center instrument panel trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Removal and Replacement) .