B3006

DTC B3006

Circuit Description

The rear integration module (RIM) monitors the voltage input of the hood open switch signal circuit and the hood open closed switch signal circuit. During proper operation, the 2 separate voltage signals at the RIM should never be the same voltage with the hood opened or closed. If the 2 voltage signal should have the same voltage value DTC B3006 will set.

DTC Descriptor

This diagnostic procedure supports the following DTC:

DTC B3006 Hood Ajar Circuit.






Conditions for Running the DTC

This DTC shall run when the Run/Crank Relay is enabled.

Conditions for Setting the DTC

If both the hood open switch signal circuit and the hood closed switch signal circuit are simultaneously in a high or low voltage state.

Action Taken When the DTC Sets

* Remote start functions will be disabled.
* The hood ajar switch inputs will be ignored by content theft deterrent (CTD).

Conditions for Clearing the DTC

The DTC will clear when conditions for setting the DTC are no longer present

Test Description

Step 1 - Step 11:

Step 12:

The number below refers to the step number on the diagnostic table.
3. The hood ajar switch is part of the hood latch assembly.