Stabilizer Shaft Insulator Replacement (FE1, FE3)

Stabilizer Shaft Insulator Replacement (FE1, FE3)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .




2. Remove the stabilizer shaft insulator bracket retaining bolts.
3. Remove the stabilizer shaft insulator bracket.
4. Using a pry bar, pry upwards and remove the stabilizer shaft insulator from the stabilizer shaft.



Installation Procedure





1. Using a pry bar, pry upwards and install the stabilizer shaft insulator to the stabilizer shaft.
2. Install the stabilizer shaft insulator bracket to the stabilizer shaft insulator.

Notice: Refer to Fastener Notice .

3. Install the stabilizer shaft bracket retaining bolts.

Tighten the stabilizer shaft bracket retaining bolts to 33 N.m (24 lb ft).

4. Lower the vehicle.