Stabilizer Shaft Link Replacement (FE1, FE3)

Stabilizer Shaft Link Replacement (FE1, FE3)

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the stabilizer link bolt and nut.
3. Remove the stabilizer link washers, insulators, and spacer.



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the stabilizer link insulators, washers, spacer, nut and bolt.

Tighten the stabilizer link nut to 17 N.m (13 lb ft).

2. Lower the vehicle.