Torque Converter Cover: Service and Repair

Torque Converter Cover Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .




2. Remove the attaching bolts and the engine-to-transmission brace.
3. Remove the torque converter cover.



Installation Procedure


Notice: Refer to Fastener Notice .





1. Install the torque converter cover.

Tighten the cover bolt to 12 N.m (106 lb in).

2. Install the engine-to-transmission brace and attaching bolts.

Tighten the bolts to 47 N.m (35 lb ft).

3. Lower the vehicle.