Air Temperature Sensor Replacement - Upper Right Side

Air Temperature Sensor Replacement - Upper Right Side

Removal Procedure





1. Remove the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair) .
2. Disconnect the upper right DTM sensor electrical connector.
3. Remove the upper right DTM sensor from the air distribution duct.



Installation Procedure





1. Install the upper right DTM sensor to the air distribution duct.
2. Connect the upper right DTM sensor electrical connector.
3. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair) .