Inflatable Restraint Front End Sensor Replacement
Inflatable Restraint Front End Sensor Replacement
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair) .
2. Remove the retaining bolts from the inflatable restraint front end sensor.
3. Remove the sensor from the vehicle.
Installation Procedure
1. Install the sensor from the vehicle.
Notice: Refer to Fastener Notice (Fastener Notice) .
2. Install the retaining bolts to the inflatable restraint front end sensor.
Tighten the bolts to 9 N.m (80 lb in).
3. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair) .