Canister Purge Solenoid: Service and Repair

Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure





1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (Service and Repair) .




2. Disconnect the engine vacuum pipe from the EVAP canister purge solenoid valve to intake manifold EVAP pipe.
3. Disconnect the engine purge pipe from the EVAP canister purge valve (2).
4. Disconnect the EVAP canister purge valve harness connector (1).




5. Remove the EVAP canister purge valve .



Installation Procedure





1. Install the EVAP canister purge valve .




2. Connect the harness connector (1) to the EVAP canister purge valve.
3. Connect the engine purge pipe (2) to the chassis purge pipe.
4. Connect the engine vacuum pipe to the EVAP canister purge valve.




5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (Service and Repair) .