Transmission Rear Mount Bracket Replacement

Transmission Rear Mount Bracket Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Support the engine assembly with a suitable jack.
3. Remove the nuts (1) securing the transmission mount (2) to the transmission mount bracket (3).




4. Raise the jack allowing the engine assembly to lift from the engine frame slightly.
5. Remove the transmission mount bracket mounting bolts.
6. Remove the transmission mount bracket

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the transmission mount bracket and mounting bolts to the engine.

Tighten the bolts to 110 Nm (89 lb ft).

2. Lower the transmission in position.




3. Install the nuts (1) to the mount (2) and mount bracket (3).

Tighten the mount nut to 75 Nm (55 lb ft).

4. Remove the engine assembly support jack.
5. Lower the vehicle.