Automatic Volume Control: Service and Repair

Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure

1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair).




2. Remove the 2 retaining screws from the microphone.
3. Remove the microphone from the knee bolster trim panel.

Installation Procedure

1. Install the microphone to the knee bolster trim panel.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 2 retaining screws to the microphone and tighten to 2.5 Nm (22 lb in).
3. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair).