Hazard Warning Switch: Service and Repair

Hazard Warning Switch Replacement

Removal Procedure

1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair).




2. Remove the hazard warning switch from the center air outlet.
Carefully release the switch retaining tabs from the rear of the air outlet, then pull to remove the switch.

Installation Procedure




1. Install the hazard warning switch to the center air outlet.
Align the switch to the rear of the air outlet, then push to secure the switch.
2. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Service and Repair).