Coolant Heater Cord Replacement

Coolant Heater Cord Replacement

Removal Procedure




1. Remove the surge tank inlet hose/pipe. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (Radiator Surge Tank Inlet Hose/Pipe Replacement).
2. Disconnect the coolant heater cord electrical connector (2) from the right coolant heater electrical connector (1).




3. Disconnect the coolant heater cord electrical connector (3) from the left coolant heater electrical connector (2).
4. Cut the coolant heater cord strap (4) at the engine harness.
5. Remove the coolant heater cord clip (1) from the lift hook bracket.




6. Remove the coolant heater cord clips from the fuel rail studs.
7. Cut the coolant heater cord strap at the engine harness.

Installation Procedure




1. Install the coolant heater cord clips to the fuel rail studs.
2. Install a NEW strap attaching the coolant heater cord to the engine harness.




3. Install the coolant heater cord clip (1) to the lift hook bracket.
4. Install a NEW strap attaching the coolant heater cord to the engine harness.
5. Connect the coolant heater cord electrical connector (3) to the left coolant heater electrical connector (2).




6. Connect the coolant heater cord electrical connector (2) to the right coolant heater electrical connector (1).
7. Install the surge tank inlet hose/pipe. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement (Radiator Surge Tank Inlet Hose/Pipe Replacement).