Oil Pump Suction Pipe and Screen Assembly Replacement

Oil Pump Suction Pipe and Screen Assembly Replacement

Removal Procedure

1. Remove the engine oil pan. Refer to Oil Pan Replacement (Service and Repair).




2. Remove the oil pump pickup tube support nut (3) from the main bearing stud.
3. Remove the mounting bolt (1) from the oil manifold plate.
4. Remove the oil pump pickup tube (2).

Installation Procedure




1. Lubricate the silicone seal in the oil manifold plate.
With a twisting motion, install the end of the oil pump pick-up tube (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the oil pump pick-up retaining bolt (1) and nut (3).

* Tighten the oil pump pick-up tube nut to 24 Nm (18 lb ft).
* Tighten the oil pump pick-up tube bolt to 10 Nm (89 lb in).

3. Install the oil pan. Refer to Oil Pan Replacement (Service and Repair).