Battery Negative Cable Extension Cable Replacement

Battery Negative Cable Extension Cable Replacement (3.0L,3.6L)

Removal Procedure

1. Remove the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement Service and Repair.

2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Coupe) Battery Negative Cable Disconnection and Connection (Coupe)Battery Negative Cable Disconnection and Connection (Sedan,Wagon) Battery Negative Cable Disconnection and Connection (Sedan,Wagon).





3. Remove the battery negative cable ground bolt (1).

4. Lift the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.





5. Remove the Battery Cable Terminal Bolt (1).

6. Note the routing of the battery negative cable extension cable (2) and remove it from the vehicle.

Installation Procedure





1. Position the battery negative cable extension cable (2) to the vehicle.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the Battery Cable Terminal Bolt (1).

Tighten the bolt to 35 Nm (26 lb ft).





3. Install the battery negative cable ground bolt (1).

20 Nm (15 lb ft).

4. Install the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement Service and Repair.

5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Coupe) Battery Negative Cable Disconnection and Connection (Coupe)Battery Negative Cable Disconnection and Connection (Sedan,Wagon) Battery Negative Cable Disconnection and Connection (Sedan,Wagon).