Brake Fluid Level Indicator Switch Replacement (J55)

Brake Fluid Level Indicator Switch Replacement (J55)

Removal Procedure

1. Without draining the coolant and without disconnecting the hoses, position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement Radiator Surge Tank Replacement.

2. Disconnect the brake fluid level indicator switch electrical connector.




3. Compress the locking tabs on the inboard side of the master cylinder reservoir and remove the brake fluid level indicator switch (1).

Installation Procedure




1. Install the brake fluid level indicator switch (1).

2. Ensure the locking tabs of the brake fluid level indicator switch are fully engaged in the master cylinder reservoir.

3. Connect the brake fluid level indicator switch electrical connector.

4. Reposition the radiator surge tank. Refer to Radiator Surge Tank Replacement Radiator Surge Tank Replacement.