Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement

Removal Procedure




Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution).
1. Disconnect the negative battery cable.

Notice: Refer to Vehicle Lifting and Jacking Notice (Vehicle Damage Warnings).

2. Raise and suitably support the vehicle.
3. Disconnect the electrical connector for the rear wheel speed sensor from the rear axle.
4. Remove the mounting bolt from the rear wheel speed sensor.
5. Remove the cable grommets from the rear wheel speed sensor, and remove the speed sensor.


Installation Procedure




1. Install the rear wheel speed sensor, and install the cable grommets.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the rear wheel sensor mounting bolt.

Tighten the bolt to 9 N.m (80 lb in).

3. Connect the electrical connector for the rear wheel speed sensor to the rear axle.
4. Lower the vehicle.
5. Connect the negative battery cable.