Valve Rocker Arm Cover Replacement - Right Side

Valve Rocker Arm Cover Replacement - Right Side

Removal Procedure





1. Remove the engine sight cover. Refer to Upper Intake Manifold Sight Shield Replacement (Service and Repair) .
2. Remove the crankcase ventilation hoses/pipes. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (6.2L) (Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (6.2L))Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (7.0L) (Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (7.0L)) .
3. Remove the ignition coil assembly.




4. Loosen the valve rocker arm cover bolts.
5. Remove the valve rocker arm cover.




6. Remove the gasket (1) from the rocker cover. Discard the OLD gasket.



Installation Procedure

Important:
* All gasket surfaces should be free of oil and other foreign material during assembly.

* DO NOT reuse the valve rocker arm cover gasket.

* The valve rocker arm cover bolt grommets may be reused.








1. Install a NEW gasket (1) into the valve rocker cover lip.




2. Install the valve rocker arm cover onto the cylinder head.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Tighten the rocker arm cover bolts.

Tighten the valve rocker arm cover bolts to 12 N.m (106 lb in).

4. Install the oil fill tube into the rocker arm cover.




5. Install the ignition coil assembly.
6. Install the crankcase ventilation hoses/pipes. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (6.2L) (Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (6.2L))Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (7.0L) (Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (7.0L)) .
7. Install the engine sight cover. Refer to Upper Intake Manifold Sight Shield Replacement (Service and Repair) .