Seat Temperature Control Module: Service and Repair

Front Seat Heater Control Module Replacement

Removal Procedure





1. Remove the seat. Refer to Seat Replacement (Seat Replacement) .




2. Remove the plastic fasteners securing the heated seat control module to the seat cushion foam support wires.
3. Disconnect the harness connectors.
4. Remove the heated seat control module from the seat.



Installation Procedure





1. Position the heated seat module to the seat cushion foam support wires.
2. Secure the heated seat module to the seat cushion foam support wires with tie straps.
3. Connect harness connectors to the memory seat control module.




4. Install the seat. Refer to Seat Replacement (Seat Replacement) .
5. Reprogram the Heated Seat Module. Refer to Heated Seat Control Module Programming and Setup (Programming and Relearning) .
6. Refer to Control Module References (Programming and Relearning) for programming and setup information.