Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure





1. Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .
2. Disconnect the electrical connector from the park brake warning lamp switch.




3. Remove the park brake warning lamp switch screw (3).
4. Remove the park brake warning lamp switch (2) from the park brake pedal assembly (1).



Installation Procedure





1. Install the park brake warning lamp switch (2) to the park brake pedal assembly (1).

Notice: Refer to Fastener Notice .

2. Install the park brake warning lamp switch screw (3).

Tighten the screw to 2 N.m (18 lb in).





3. Connect the electrical connector to the park brake warning lamp switch.
4. Install the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .
5. Check the operation of the park brake warning lamp switch.