Coolant Heater Cord Replacement

Coolant Heater Cord Replacement (LY7) (3.6L)

Removal Procedure

1. Remove the surge tank fasteners and reposition the tank aside. Refer to Radiator Surge Tank Replacement (Service and Repair).




2. Disconnect the engine coolant heater cord (1).




3. Disconnect the clip (1) from the transmission range selector lever cable bracket (2).




4. Remove the heater cord (1).

Installation Procedure




1. Install the heater cord (1).




2. Connect the clip (1) to the transmission range selector lever cable bracket (2).




3. Connect the engine coolant heater cord (1).
4. Reposition the surge tank and install the fasteners. Refer to Radiator Surge Tank Replacement (Service and Repair).