Inflatable Restraint Front End Sensor Replacement

Inflatable Restraint Front End Sensor Replacement

Removal Procedure




Warning: Refer to Sensing and Diagnostic Module Voltage after Ignition is Turned Off Warning (Sensing and Diagnostic Module Voltage after Ignition is Turned Off Warning).

Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Disconnect the connector (1) from the front air bag sensor (3).
3. On hatchback vehicles, remove the headlamp assembly. Refer to Headlamp Replacement (Notchback) (Service and Repair).
4. Remove the front air bag sensor mounting bolt (2).
5. Remove the front air bag sensor.

Installation Procedure




1. Install the front air bag sensor.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the front air bag sensor mounting bolt (2).

Tighten the side air bag sensor mounting bolts to 10 Nm (89 lb in).

3. Connect the connector (1) to the front air bag sensor (3).
4. On hatchback vehicles, install the headlamp assembly. Refer to Headlamp Replacement (Notchback) (Service and Repair).
5. Connect the negative battery cable.