Harmonic Balancer - Crankshaft Pulley: Service and Repair

Crankshaft Balancer Replacement

Special Tools

EN-48018 Flywheel Holding Tool

Removal Procedure




1. Remove the drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement - Accessory)
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Remove the transmission bell housing inspection hole cover.
4. Install the EN-48018 flywheel holding tool as shown.
5. Remove the front air deflector.




6. Remove the crankshaft balancer. Refer to Crankshaft Balancer Removal (2. Crankshaft Balancer Removal).

Installation Procedure




1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation (112. Crankshaft Balancer Installation).




2. Install the front air deflector.
3. Remove the EN-48018 flywheel holding tool.
4. Install the transmission bell housing inspection hole cover.
5. Install the drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement - Accessory)