Timing Belt Rear Cover Replacement

Timing Belt Rear Cover Replacement (1.6L LDE, LXV, 1.8L 2H0, and LUW)

Removal Procedure

1. Remove the camshaft position actuator adjuster. Refer to Camshaft Position Actuator Adjuster Replacement (Camshaft Position Actuator Adjuster Replacement).
2. Remove the timing belt tensioner. Refer to Timing Belt Tensioner Replacement (1.6L LDE, LXV, 1.8L 2H0, and LUW) (Service and Repair).




3. Remove the 4 timing belt rear cover bolts (2).

Note: Oil can escape. Use a cloth, rag or paper to take the oil drain away from all timing components.

4. Remove the timing belt rear cover (1).

Installation Procedure

1. Clean the 4 timing belt rear cover threads.
2. Apply locking compound to the 4 NEW timing belt rear cover bolts.





Note: If the cover is contaminated with oil. You have to clean it close.

3. Install the timing belt rear cover (1).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the 4 timing belt rear cover bolts (2) and tighten to 6 Nm (53 lb in).
5. Install the timing belt tensioner. Refer to Timing Belt Tensioner Replacement (1.6L LDE, LXV, 1.8L 2H0, and LUW) (Service and Repair).
6. Install the camshaft position actuator adjuster. Refer to Camshaft Position Actuator Adjuster Replacement (Camshaft Position Actuator Adjuster Replacement).