Removal and Replacement

Throttle Body Assembly Replacement (1.6L LDE, LXV, 1.8L 2H0, and LUW)

Removal Procedure

1. Open the hood.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (1.6L LDE, LXV, and 1.8L 2H0) (Service and Repair).




3. Disconnect the wiring harness plug (2).
4. Disconnect the positive crankcase ventilation pipe (1).
5. Place collecting basin underneath.
6. Disconnect the throttle body heater outlet pipe (4).
7. Disconnect the throttle body heater inlet pipe (3).




8. Remove the 4 throttle body bolts (2).
9. Remove the throttle body (1).

Installation Procedure




1. Install the throttle body (1).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 4 throttle body bolts (2) and tighten to 8 Nm (71 lb in).




3. Connect the throttle body heater inlet pipe (3).
4. Connect the throttle body heater outlet pipe (4).
5. Connect the positive crankcase ventilation pipe (1).
6. Connect the wiring harness plug (2).
7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (1.6L LDE, LXV, and 1.8L 2H0) (Service and Repair).
8. Close the hood.