Rear Wheel Speed Sensor Replacement (Drum Brake)

Rear Wheel Speed Sensor Replacement (Drum Brake)

Removal Procedure

1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement (Service and Repair).




2. Remove the wheel speed sensor screw (2) from the steering knuckle.
3. Remove wheel speed sensor (1).
4. Remove wiring harness (3) from bracket (4).




5. Disconnect the electrical connector (1).
6. Remove wheel speed sensor from vehicle.

Installation Procedure




1. Install the wheel speed sensor to the vehicle.
2. Connect the electrical connector (1).




3. Install the wheel speed sensor (1) to steering knuckle.
4. Install wiring harness (3) at the bracket (4).

Caution: Refer to Fastener Caution (Fastener Caution).

5. Install the wheel speed sensor screw (2) and tighten to 9 Nm (80 lb in).
6. Install rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement (Service and Repair).