Shift Cable: Adjustments

Range Selector Lever Cable Adjustment

Removal Procedure

Note: Adjust the automatic transmission range selector cable while the transmission and the gear selector are in the Park position only. Failure to do so may cause miss-adjustment.

1. Set the park brake and chock the wheels.
2. Remove transmission control lever trim cover. Refer to Automatic or Manual Transmission Control Lever Trim Cover Replacement (Service and Repair)
3. Remove instrument panel center compartment mat.
4. Remove front floor console storage tray. Refer to Front Floor Console Storage Tray Replacement (Front Floor Console Storage Tray Replacement)




5. Remove range selector lever cable adjust lock (1).
6. Remove engine control module from battery tray. Refer to Engine Control Module Replacement (Service and Repair)

Installation Procedure

1. Verify the transmission range selector lever is in the park position.
2. Verify the transmission shift lever is in the park position.




3. Install the range selector lever cable adjust lock (1).
4. Install front floor console storage tray. Refer to Front Floor Console Storage Tray Replacement (Front Floor Console Storage Tray Replacement)
5. Install instrument panel center compartment mat.
6. Install transmission control lever trim cover. Refer to Automatic or Manual Transmission Control Lever Trim Cover Replacement (Service and Repair)
7. Install engine control module to battery tray. Refer to Engine Control Module Replacement (Service and Repair)
8. Check the transmission range selector lever in all gear selections for proper operation.