4T65-E - Automatic Transmission

Transmission Control Replacement

Removal Procedure

1. Remove the console trim plate. Refer to Front Floor Console Replacement (Front Floor Console Replacement).
2. Remove the console wiring harness.




3. Remove the console shift control wiring harness.
4. Remove the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Replacement (Service and Repair).
5. Disconnect the light bulb and the retainer from the shiftier.




6. Remove the console shift control retaining nuts.
7. Remove the console shift control assembly from the vehicle.

Installation Procedure




1. Install the console shift control into the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the console shift control retaining nuts and tighten to 20 Nm (15 lb ft).
3. Install the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Replacement (Service and Repair).




4. Install the console shift control wiring harness.
5. Install the console wiring harness.
6. Install the console trim plate. Refer to Front Floor Console Replacement (Front Floor Console Replacement).