Timing Belt Idler Pulley: Service and Repair

Timing Belt Idler Pulley Replacement

Removal Procedure

1. Remove the timing belt. Refer to Timing Belt Replacement Service and Repair.




2. Remove and DISCARD the timing belt idler pulley bolt (1).
3. Remove the timing belt idler pulley (2).

Installation Procedure




1. Clean the timing belt idler pulley thread.

Caution: Refer to Fastener Caution Fastener Caution.

Caution: Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

2. Install the timing belt idler pulley (2) and the NEW bolt (1) with screw locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers Adhesives, Fluids, Lubricants, and Sealers.
3. Tighten the NEW bolt (1) to 25 Nm (18 lb ft).
4. Install the timing belt. Refer to Timing Belt Replacement Service and Repair.