Front Compartment Fuse Block Replacement

Front Compartment Fuse Block Replacement

Removal Procedure

1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without Start/Stop System) Battery Negative Cable Disconnection and Connection (without Start/Stop System).
2. Remove the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement Front Compartment Fuse Block Cover Replacement.





Note: Bolts (1) are encapsulated on the end of threads so that they can not be removed from the fuse block. The fuse block must be pulled out to expose the positive cable lug.

3. Remove the 3 front compartment fuse block bolts (1).
4. Unlock retaining tabs and remove the front compartment fuse block (3).
5. Remove the front compartment fuse block wiring harness supply (2).

Installation Procedure





Caution: Refer to Fastener Caution Fastener Caution.

1. Install front compartment fuse block wiring harness supply (1) and tighten to 12 Nm (106 lb in).
2. Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).




3. Install 3 front compartment fuse block bolts (1) and tighten to 6 Nm (53 lb in).
4. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement Front Compartment Fuse Block Cover Replacement.
5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without Start/Stop System) Battery Negative Cable Disconnection and Connection (without Start/Stop System).