Oil Pan: Service and Repair

Oil Pan Replacement

Special Tools

EN-46109 - Guide Pin Set

For equivalent regional tools, refer to Special Tools Special Tools.

Removal Procedure

1. Drain the engine oil and remove the oil filter. Refer to Engine Oil and Oil Filter Replacement Service and Repair.





2. Remove the engine front mount bracket (3). Refer to Engine Front Mount Bracket Replacement Engine Front Mount Bracket Replacement.





3. Remove the engine rear mount bracket (2). Refer to Engine Rear Mount Bracket Replacement Engine Rear Mount Bracket Replacement.

4. Remove the front cover. Refer to Engine Front Cover Replacement Service and Repair.





5. Remove the oil pan to transmission bolts (1).





6. Remove the oil pan bolts (1).





7. Remove the oil pan (1).

8. Clean the oil pan and the engine block gasket surface. Refer to Oil Pan Cleaning and Inspection 73. Oil Pan Cleaning and Inspection.

Installation Procedure





1. Install the 8 mm (0.315 in) guides (1) from the EN-46109 - set into the center oil pan rail bolt hole on each side of the engine block.





2. Place a 3 mm (0.118 in) bead (1) of RTV sealant , on the block pan rail and the crankshaft rear oil seal housing.





3. Position the oil pan (1) onto the engine block.





4. Remove the EN-46109 - set 8 mm (0.315 in) guides (1) from the engine block.





5. Loosely install the oil pan bolts (1).





Caution:
Refer to Fastener Caution Fastener Caution.

6. Tighten the oil pan bolts in sequence.

1. The 8 mm bolts (1-11) to 23 Nm (17 lb ft).

2. The 6 mm bolts (12, 13) to 10 Nm (89 lb in).





7. Install the oil Pan to transmission bolts (1) and tighten to 23 Nm (17 lb ft).

8. Install engine front cover. Refer to Engine Front Cover Replacement Service and Repair.





9. Install the engine rear mount bracket (2). Refer to Engine Rear Mount Bracket Replacement Engine Rear Mount Bracket Replacement.





10. Install the engine front mount bracket (3). Refer to Engine Front Mount Bracket Replacement Engine Front Mount Bracket Replacement.

11. Refill the engine oil. Refer to Engine Oil and Oil Filter Replacement Service and Repair.